| Step | | Procedure & Parts & Tools |
| 1 |
|
REMOVE THE CAPS TO DRAIN THE TANKS
|
| 2 |
|
PULL TO REMOVE THE RED CAPPED HOSE FROM MACHINE. PLACE HOSE NEAR DRAIN AND REMOVE CAP
|
| 3 |
|
PULL TO REMOVE THE BLUE CAPPED HOSE FROM MACHINE. PLACE HOSE NEAR DRAIN AND REMOVE CAP
|
| 4 |
|
REMOVE THE 2 TANK BOLTS ON EACH SIDE OF THE MACHINE. THESE BOLTS ARE LOCATED AT THE FRONT OF THE MACHINE AT THE BASE.
| Wrench-Allen metric 6.0mm |
|
|
| 5 |
|
LIFT THE TANK TO OPEN THE MACHINE
|
| 6 |
|
REMOVE THE 2 BOLTS FROM THE BRUSH HEAD SHROUD
| Screwdriver-phillips |
|
|
| 7 |
|
VISUALLY INSPECT THE OUTSIDE LINKAGE ON BOTH SIDES OF THE MACHINE TO SEE IF ITS BENT OR BROKEN
|
| 8 |
|
REMOVE THE BATTERIES
|
| 9 |
|
LAY THE MACHINE ON ITS SIDE
|
| 10 |
|
VISUALLY INSPECT THE INSIDE LINKAGE ON BOTH SIDES OF THE MACHINE TO SEE IF ITS BENT OR BROKEN
|
| 11 |
|
VISUALLY INSPECT THE LINKAGE UNDER BOTH WHEELS FOR DAMAGE
|
| 12 |
|
IF THE LINKAGE IS OKAY, STAND MACHINE UPRIGHT, REPLACE THE BATTERIES AND BRUSH HEAD SHROUD, CLOSE THE TANK AND REPLACE THE TANK BOLTS. FILL THE SOLUTION TANK IF NEEDED
|